«RS Motor» has a fully equipped workshop in Porriño (Pontevedra, Spain) with the necessary experience, equipment and supplies to perform maintenance works on the gas engines we have under our maintenance or not. We also carry out reconditioning works for the most important elements of the engine.
An engine overhaul is a major maintenance intervention, where the engine is removed and disassembled part by part, following approved assembly processes. Worn elements are replaced and the reconditioned engine is returned to its initial state of use.
Due to the complexity of the procedure, we generally take the overhauled engine to our workshop. Here we have all the necessary means and equipment to carry out these works with all the guarantees on engines up to 4.50 MW.
Sometimes, and where downtime makes it unfeasible to remove the engine to our workshop, we can perform the overhaul on an exchange block, minimizing downtime-machine and resuming production in minimal time.
Reconditioning an engine involves disassembling its mechanical elements, inspecting and verifying the state of the engine, cleaning the mechanical parts with ultrasounds and carrying out controls and/or hydraulic tests. Worn elements are replaced and the reconditioned engine is restored to zero hours.
Engine elements usually reconditioned in the «RS Motor» workshop are:
- Cylinder heads.
- Water pumps.
- Plate heat exchangers.
- Oil pumps.
- Connecting rods (dimensional control & renew of bushings).
- Zero pressure valves.
- Water jackets.
- Throttle valves.
- Gas mixers.
- Fuel pumps.
In case you need to repair, reconditioning, or carry out a preventive or corrective maintenance, «RS Motor» is specialist on the following brands and types:
- DEUTZ / MWM TBG616 / TCG2016;
- DEUTZ / MWM TBG620 / 2020;
- DEUTZ / MWM TBG632 / 2032;
- and many more.
- Jenbacher type 2;
- Jenbacher type 3;
- Jenbacher type 4 and,
- Jenbacher type 6 (it does not matter the number of cylinders).
- Guascor / Siemens FG / FGLD / SFGLD 180;
- FG / FGLD / SFGLD / HGM 240;
- FGLD / SFGLD 360;
- FGLD / SFGLD 480 and,
- SFGLD / SFGM / HGM 560.
Please, do not hesitate to contact us.
Today we show you the spare parts that «RS Motor» uses for performing a maintenance type R1 on a Guascor gas engine type FGLD-240.
R1 maintenance needs to be performed each 8.400 running hours in case of biogas engines. In this case, our customer has the engine in a Waste Water Treatment Plant.
The main steps of this maintenance type R1 are the following ones:
- Renew main oil filters.
- Renew air filters.
- Renew spark plugs and ignition cables. This time we choose Denso spark plugs and ignition cables from our “Partner” Motortech.
- Refurbishment of the 8x cylinder heads. After that, our team should check the valve lag.
- Cleaning of pistons and cylinder liners.
- Renew of thermostats.
- Turbocharger standard maintenance.
- Renew bearings of throttle valve.
- Refurbishment of water pump and oil pump.
- General checking and other important inspections.
- Final commissioning.
In order to achieve the best quality as possible, «RS Motor» supplies and install only Genuine and/or OEM Guascor spare parts.
This is the same for the other brands of engines we usually carry out Service. «RS Motor» is synonym of accuracy and quality thanks to the purchasing DEUTZ/MWM, Jenbacher and Guascor genuine and OEM spare parts.
That is our secret, as well as the years of background we have gotten, working hard from the beginning.
We hope you enjoy! If you need some original spare part, please, contact with «RS Motor». Our team will help to you, for sure!
Guascor or Siemens gas engines, are another of the main business of «RS Motor».
Nowadays, the company «RS Motor» is specialized on preventive and/or corrective maintenances on these type of engines. Linked to this, the supply of parts is also essential in order to give the best answer as possible.
Related with Guascor engines, the story begins by carrying out maintenances on engines located near to our workshop. Little by little, we grew thanks to the acquired experience until now, reaching the point that we are able to supply Guascor/Siemens parts worldwide.
The supply of genuine and OEM spare parts to our customers, and the use of them on preventive maintenances, corrective maintenances and different repairs both on-site and in our own workshop, makes «RS Motor» to be one of the best alternatives to the official brand Guascor/Siemens.
«RS Motor» is expert on performing service and selling spare parts for any kind of Guascor/Siemens engine, but we highlight the following models:
- FG/FGLD/SFGLD 180
- FG/FGLD/SFGLD/HGM 240
- FGLD/SFGLD 360
- FGLD/SFGLD 480
- SFGLD/SFGM/HGM 560
Then if you have a Guascor/Siemens engine and you want to buy parts, or hire service from the best alternative to the official brand, please, call/write to «RS Motor» wherever your engine is.
This week, the «RS Motor» team is performing a R2 maintenance on a GUASCOR FG-180 engine.
In this maintenance step, our team will install new pistons, new liners, new connecting rod bearings, ignition cables, spark plugs… About the labor in our own workshop, the refurbishment of cylinder heads, water pumps and oil cooler is also essential and needed.
As usually, using Genuine or OEM parts we are going to reach the best quality, giving to the customer a good guarantee for a lot of years.
Thanks to our specific tools for GUASCOR engines, we can finish the labor in few days.
Then the engine is ready for running a lot of hours until the next big maintenance (R1).
OFFER REQUEST: R2 MAINTENANCE ON A GUASCOR/SIEMENS ENGINE
Don’t forget!!, If you need the best Service on GUASCOR/ SIEMENS engines (whatever the engine type and/or maintenance), please, ask to «RS Motor» for price and availability. We are sure you will repeat.
As a specialized company on DEUTZ/MWM and Jenbacher engines, this time we show you we are also proficient on GUASCOR diesel and gas engines.
«RS Motor» is able to carry out any type of preventive and corrective maintenance on GUASCOR engines (in workshop or “on-site”).
About preventive maintenances, from E1 to R3 (Overhaul), the team of «RS Motor» can solve any issue by using always original spare parts (genuine and OEM).
Thanks to our several years of experience, many customers trust in us to repair any part of their GUASCOR engines.
The refurbishment of cylinder heads, intercoolers, water pumps, starters, con-rods… is our daily labor.
We always try to achieve the best final results thanks to our specific tools. These tools allow to our engineers to shorten the delivery time and to work efficiently and with the maximum precision and accuracy.
Apart of labor on GUASCOR engines, we are able to supply spare parts worldwide respecting always the maximum quality, i.e, with OEM and genuine spare parts.
Another refurbishment of cylinder heads in the own workshop of RS MOTOR: cylinder heads DEUTZ/MWM 632/2032 of one of our bests customers in Spain.
Continue reading “Refurbishment of cylinder heads DEUTZ/MWM 632/2032 (Spain)”