Jenbacher gas engines, typical intervals for preventive maintenances

Motores-Jenbacher--intervalos-mantenimiento--Jenbacher-gas-engines-intervals-maintenance

Motores-Jenbacher--intervalos-mantenimiento--Jenbacher-gas-engines-intervals-maintenance

In this case we will try to show you the most common intervals of preventive maintenance steps on Jenbacher gas engines.

It is well know that the main Jenbacher engines on the market are: Jenbacher type 3, Jenbacher type 4 and/or Jenbacher type 6. The number of cylinders does not affect to the interval, but this is not the case with the type of gas (natural gas, landfill gas, sewerage gas, coal mine gas, syntgas…).

«RS Motor» is able to perform any type of preventive maintenance on Jenbacher gas engines. Usually preventive maintenances are performed on-site, but in case of Overhaul or major Overhaul, this could be carried out both “on-site” or in the workshop of «RS Motor».

In this case we are going to explain typical operations that «RS Motor» has to take into account when a Jenbacher engine which runs with natural gas needs PREVENTIVE MAINTENANCE.

  • For replacement of expendables/consumables like oil filters, the interval should be about 1.000 – 2.000 running hours. Then, the intermediate maintenances occur each 10.000 running hours.
  • After that, in case of Jenbacher engines type 6, the Overhauls occur at 30K and/or 60K running hours. In this case, renew of pistons, main bearings, cylinder liners… is necessary. These Overhauls can be performed “on-site” or in «RS Motor».

Apart of preventive or scheduled maintenances, sometimes the engine has unexpected failures. When this happens, «RS Motor» goes to the customer’s power plant in order to make some inspections for determining the scope of damage. Then the engine is repair taking into account its history, the running hours, etc. This situation is usually called as CORRECTIVE MAINTENANCE. The key is always to try to shorten the stop time of the power plant due t the fac that each hour the engine is stopped, means a lot of money to the final customer.

In both cases, when you need preventive or corrective maintenances, «RS Motor» is one of the best companies you have to take into account. Our large stock of Jenbacher spare parts and the several years of experience of our field engineers and workshop technicians, can solve the major part of the problems the engine has. Anyway, if the required spare parts are not in our stock, we could offer you different options like refurbished parts (con-rods, intercoolers, pumps, etc.) or supply new parts with a relatively short delivery time.

Please, feel free to contact with «RS Motor» if you have a Jenbacher engine. It does not matter where you are even nowadays. We are able to go to any country of the world.

 

Precio filtros motores de gas y diesel

 

Daily refurbishments and repairs in RS Motor

engines-refurbishments-and-repairs-reacondicionados-y-reparaciones-de-motores

This week we show you few examples of different refurbishments and repairs. As you can see in the pictures, «RS Motor» is able to repair and refurbish spare parts and engine parts of DEUTZ/MWM, Jenbacher and Guascor engines.

As we have shown you many times, in our own workshop of more than 750 m2 and thanks to the specific equipment, the quality of all repairs and refurbishments is unbeatable.

The «RS Motor» team is able to carry out at the same time different labors in also different engines. The most common engines we Overhaul in our facilities are:

  • Deutz/MWM TBG616/TCG2016,
  • Deutz/MWM TBG620/TCG2020,
  • Deutz/MWM TBG632/TCG2032,
  • Deutz TBD616/TBD620,
  • Jenbacher type 3,
  • Jenbacher type 4,
  • Jenbacher type 6,
  • Guascor FG, FGLD, SFGLD, HGM, SFGM ….

whatever the number of cylinders.

Every passing day «RS Motor» is improving the quality of the labor thanks to the continuous formation of our specialized technicians and engineers.

Our team is composed by highly qualified workshop technicians, field engineers, field technicians…All of them with several years of experience. Every technician or engineer of «RS Motor»r uses always original spare parts (genuine and/or OEM) purchased by the «RS Motor» technical buyers, who are always looking for the best quality products available in the market.

The final result is that, joining forces, the team of «RS Motor» results as the best alternative to the manufacturer of the engine.

Enjoy the pictures of some refurbishments in the workshop!!!