The major maintenance required by Guascor gas engines is also known as maintenance type R3.
Commonly, this type of preventive maintenance is carried our each 50.400 running hours (whatever the gas the engine consumes).
In this occasion, we show you some pictures of genuine spare parts we used to carry out the engine Overhaul of that Guascor engine in our facilities.
Required labor in our facilities was 1-2 weeks in this case, in order to finish everything. Main repairs, renews, and refurbishments we carried out were the following ones:
- Renew of main bearings.
- Renew oil pump and water pump.
- Renew all pistons, cylinder liners.
- Refurbishment of con-rods, changing the small end bushings and the bolts.
- Refurbishment of all cylinder heads.
- Check status of engine block, crankshaft and camshaft.
- Renew turbocharger.
- Generator/alternator standard checking.
- Renew intercooler.
- Renew spark plugs, ignition coils and ignition cables.
- Renew oil filters and air filters.
- Renew main vibration damper.
- Renew starter.
- Renew thermostats.
Definitely these are the labors needed on a maintenance type R3 of any Guascor engine. Anyway, we could carry out it “on-site” if the customer does not want to ship the engine out of its Power Plant, or in case the execution time is too short.
In short, we hope you trust in «RS Motor» to supply spare parts for your Guascor engine, as well as for refurbishing their parts, or even to carry out all needed preventive and/or corrective maintenances. Many customers already believe in us!.
You can be the next one, try!!!
Guascor or Siemens gas engines, are another of the main business of «RS Motor».
Nowadays, the company «RS Motor» is specialized on preventive and/or corrective maintenances on these type of engines. Linked to this, the supply of parts is also essential in order to give the best answer as possible.
Related with Guascor engines, the story begins by carrying out maintenances on engines located near to our workshop. Little by little, we grew thanks to the acquired experience until now, reaching the point that we are able to supply Guascor/Siemens parts worldwide.
The supply of genuine and OEM spare parts to our customers, and the use of them on preventive maintenances, corrective maintenances and different repairs both on-site and in our own workshop, makes «RS Motor» to be one of the best alternatives to the official brand Guascor/Siemens.
«RS Motor» is expert on performing service and selling spare parts for any kind of Guascor/Siemens engine, but we highlight the following models:
- FG/FGLD/SFGLD 180
- FG/FGLD/SFGLD/HGM 240
- FGLD/SFGLD 360
- FGLD/SFGLD 480
- SFGLD/SFGM/HGM 560
Then if you have a Guascor/Siemens engine and you want to buy parts, or hire service from the best alternative to the official brand, please, call/write to «RS Motor» wherever your engine is.
As a specialized company on DEUTZ/MWM and Jenbacher engines, this time we show you we are also proficient on GUASCOR diesel and gas engines.
«RS Motor» is able to carry out any type of preventive and corrective maintenance on GUASCOR engines (in workshop or “on-site”).
About preventive maintenances, from E1 to R3 (Overhaul), the team of «RS Motor» can solve any issue by using always original spare parts (genuine and OEM).
Thanks to our several years of experience, many customers trust in us to repair any part of their GUASCOR engines.
The refurbishment of cylinder heads, intercoolers, water pumps, starters, con-rods… is our daily labor.
We always try to achieve the best final results thanks to our specific tools. These tools allow to our engineers to shorten the delivery time and to work efficiently and with the maximum precision and accuracy.
Apart of labor on GUASCOR engines, we are able to supply spare parts worldwide respecting always the maximum quality, i.e, with OEM and genuine spare parts.