Maintenance type R3 (Overhaul) on a Guascor gas engine

Mantenimiento-R3-Overhaul-sobre-un-motor-Guascor-de-gas-Maintenance-type-R3-Overhau)-on-a-Guascor-F

Mantenimiento-R3-Overhaul-sobre-un-motor-Guascor-de-gas-Maintenance-type-R3-Overhau)-on-a-Guascor-gas-engine

The major maintenance required by Guascor gas engines is also known as maintenance type R3.

Commonly, this type of preventive maintenance is carried our each 50.400 running hours (whatever the gas the engine consumes).

In this occasion, we show you some pictures of genuine spare parts we used to carry out the engine Overhaul of that Guascor engine in our facilities.

Required labor in our facilities was 1-2 weeks in this case, in order to finish everything. Main repairs, renews, and refurbishments we carried out were the following ones:

  • Renew of main bearings.
  • Renew oil pump and water pump.
  • Renew all pistons, cylinder liners.
  • Refurbishment of con-rods, changing the small end bushings and the bolts.
  • Refurbishment of all cylinder heads.
  • Check status of engine block, crankshaft and camshaft.
  • Renew turbocharger.
  • Generator/alternator standard checking.
  • Renew intercooler.
  • Renew spark plugs, ignition coils and ignition cables.
  • Renew oil filters and air filters.
  • Renew main vibration damper.
  • Renew starter.
  • Renew thermostats.
  • Painting.

Definitely these are the labors needed on a maintenance type R3 of any Guascor engine. Anyway, we could carry out it “on-site” if the customer does not want to ship the engine out of its Power Plant, or in case the execution time is too short.

In short, we hope you trust in «RS Motor» to supply spare parts for your Guascor engine, as well as for refurbishing their parts, or even to carry out all needed preventive and/or corrective maintenances. Many customers already believe in us!.

You can be the next one, try!!!

 

Precio filtros motores de gas y diesel

 


 

For Service, the best alternative to the official brand of the engine is «RS Motor»

alternativa a la marca oficial mwm deutz jenbacher guascor

«RS Motor» has a fully equipped workshop in Porriño (Pontevedra, Spain) with the necessary experience, equipment and supplies to perform maintenance works on the gas engines we have under our maintenance or not. We also carry out reconditioning works for the most important elements of the engine.

ENGINE OVERHAULS

An engine overhaul is a major maintenance intervention, where the engine is removed and disassembled part by part, following approved assembly processes. Worn elements are replaced and the reconditioned engine is returned to its initial state of use.

Due to the complexity of the procedure, we generally take the overhauled engine to our workshop. Here we have all the necessary means and equipment to carry out these works with all the guarantees on engines up to 4.50 MW.

Sometimes, and where downtime makes it unfeasible to remove the engine to our workshop, we can perform the overhaul on an exchange block, minimizing downtime-machine and resuming production in minimal time.

RECONDITIONING ENGINES

Reconditioning an engine involves disassembling its mechanical elements, inspecting and verifying the state of the engine, cleaning the mechanical parts with ultrasounds and carrying out controls and/or hydraulic tests. Worn elements are replaced and the reconditioned engine is restored to zero hours.

Engine elements usually reconditioned in the «RS Motor» workshop are:

  • Cylinder heads.
  • Intercoolers.
  • Actuators.
  • Water pumps.
  • Plate heat exchangers.
  • Oil pumps.
  • Starters.
  • Connecting rods (dimensional control & renew of bushings).
  • Zero pressure valves.
  • Water jackets.
  • Throttle valves.
  • Alternators.
  • Gas mixers.
  • Fuel pumps.
  • Nozzles.

In case you need to repair, reconditioning, or carry out a preventive or corrective maintenance, «RS Motor» is specialist on the following brands and types:

  • DEUTZ / MWM TBG616 / TCG2016;
  • DEUTZ / MWM TBG620 / 2020;
  • DEUTZ / MWM TBG632 / 2032;
  • and many more.
  • Jenbacher type 2;
  • Jenbacher type 3;
  • Jenbacher type 4 and,
  • Jenbacher type 6 (it does not matter the number of cylinders).
  • Guascor / Siemens FG / FGLD / SFGLD 180;
  • FG / FGLD / SFGLD / HGM 240;
  • FGLD / SFGLD 360;
  • FGLD / SFGLD 480 and,
  • SFGLD / SFGM / HGM 560.

 
Please, do not hesitate to contact us.

 

Precio filtros motores de gas y diesel

 
 

Maintenance type R1 on a Guascor gas engine type FGLD-240

Mantenimiento-R1-en-un-motor-de-gas-Guascor-Maintenance-on-a-Guascor-gas-engine-type-FGLD-240

Maintenance on a Guascor gas engine type FGLD-240
Today we show you the spare parts that «RS Motor» uses for performing a maintenance type R1 on a Guascor gas engine type FGLD-240.

R1 maintenance needs to be performed each 8.400 running hours in case of biogas engines. In this case, our customer has the engine in a Waste Water Treatment Plant.

The main steps of this maintenance type R1 are the following ones:

  1. Renew main oil filters.
  2. Renew air filters.
  3. Renew spark plugs and ignition cables. This time we choose Denso spark plugs and ignition cables from our “Partner” Motortech.
  4. Refurbishment of the 8x cylinder heads. After that, our team should check the valve lag.
  5. Cleaning of pistons and cylinder liners.
  6. Renew of thermostats.
  7. Turbocharger standard maintenance.
  8. Renew bearings of throttle valve.
  9. Refurbishment of water pump and oil pump.
  10. General checking and other important inspections.
  11. Final commissioning.

In order to achieve the best quality as possible, «RS Motor» supplies and install only Genuine and/or OEM Guascor spare parts.

This is the same for the other brands of engines we usually carry out Service. «RS Motor» is synonym of accuracy and quality thanks to the purchasing DEUTZ/MWM, Jenbacher and Guascor genuine and OEM spare parts.

That is our secret, as well as the years of background we have gotten, working hard from the beginning.

We hope you enjoy! If you need some original spare part, please, contact with «RS Motor». Our team will help to you, for sure!

 

Precio filtros motores de gas y diesel

 

Mantenimiento R1 en un motor de gas Guascor modelo FGLD-240

R2 maintenance on a GUASCOR engine type FG-180

R2-maintenance-on-a-GUASCOR-engine-type-FG-180-mantenimiento-r2-motor-guascor-fg-180

This week, the «RS Motor» team is performing a R2 maintenance on a GUASCOR FG-180 engine.

In this maintenance step, our team will install new pistons, new liners, new connecting rod bearings, ignition cables, spark plugs… About the labor in our own workshop, the refurbishment of cylinder heads, water pumps and oil cooler is also essential and needed.

As usually, using Genuine or OEM parts we are going to reach the best quality, giving to the customer a good guarantee for a lot of years.

Thanks to our specific tools for GUASCOR engines, we can finish the labor in few days.

Then the engine is ready for running a lot of hours until the next big maintenance (R1).

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

OFFER REQUEST: R2 MAINTENANCE ON A GUASCOR/SIEMENS ENGINE

Don’t forget!!, If you need the best Service on GUASCOR/ SIEMENS engines (whatever the engine type and/or maintenance), please, ask to «RS Motor» for price and availability. We are sure you will repeat.

offer-request-guascor-engines