Gas and diesel engines for sale

Motores-de-gas-y-diésel-a-la-venta

The availability of cogeneration engines is essential when a customer needs to start with a new project, or when a huge damage happens in an engine or genset.

For these reasons, «RS Motor» has a quite large stock of used engines ready to be dispatched. We have engines completely Overhauled, as well as engines which needs an Overhaul or other type of maintenances.

Anyway, «RS Motor» is able to supply gensets with “zero” running hours or with some running hours. The main brands of engines we have in stock are DEUTZ/MWM and Jenbacher.

A different option can be opt for an exchange “shortblock” or “longblock”. In this situation, «RS Motor» is also specialist. In the last months, we sold more than 10x engine shortblocks worldwide. Our policy is working with exchange “shortblocks” and/or “longblocks”, but in case the customer asks for no exchange, that is not an issue.

Please, feel free to see the engines, “shortblocks” and/or “longblocks” that «RS Motor» has on STOCK and ready for sale, wherever the final destination is.

Additional information can be seen on the following link.

We are waiting for your inquiry, do not hesitate to send it to us.


 

Wiring Rails for MWM Gas Engines

Raíles para motores de gas MWM

Motortech has started the production of its new wiring rails for MWM gas engines.

The rails are designed as a plug & play solution and direct replacement for the original MWM rails and will initially be available for many engines of the TCG 2016 and TCG 2020 series.

Thanks to the identical design and full compatibility with all connected harnesses, the wiring rails are individually replaceable and offer the aftermarket a cost-effective yet high quality alternative to the original rails from the engine manufacturer.

Wiring rails main features

  • Plug&Play Solution for MWM wiring rails.
  • Easy intalation withoud additional moficitions.
  • Compatible with all original MWM wires.
  • Delivered with MOTORTECH P.N. 06.50.055 ignition coils. Compatibles with ZS ignition controller.
  • Able to replace individually.
  • Filled with special foam to protec the wiring.
  • Aluminium rail profiles.

Wiring Rails for MWM Gas Engines
 

«RS Motor» specialists in Jenbacher and MWN engines

«RS Motor» is specialist on service and sales of spare parts for MWM and Jenbacher gas engines. Week after week, we present in this space our main projects, our labour and our products.

Today we would like to talk more in deep about the engines where «RS Motor» is specialist, both on the sales of spare parts and performing service and reconditioning parts.

Fort this, you could see below the engines range with their main specifications, configurations and pictures.

To any need concerning this kind of engines, you could trust in «RS Motor» as a well-known specialist in these engines!!I

Jenbacher type 2:

  • Electrical output: 248kW – 335kW
  • L8 cylinder
  • 1,500rpm (50Hz); 1,800 rpm (60Hz)
Jenbacher type 3:

  • Electrical output: 526kW – 1,063kW
  • V12, V16 and V20 cylinder
  • 1,500rpm (50Hz); 1,800rpm (60Hz)
Jenbacher type 4:

  • Electrical output: 844kW – 1,562kW
  • V12, V16 and V20 cylinder
  • 1,500rpm (50Hz); 1,527rpm (60Hz)
Jenbacher type 6:

  • Electrical output: 1,622 – 4,401kW
  • V12, V16, V20 and V24 cylinder
  • 1,500rpm (50Hz, 60Hz with gear-box)
MWM TCG2016 / TBG616:

  • Electrical output: 0,35 – 1 MW
  • V8, V12 y V16
  • 1.500 rpm (50 Hz, 60 Hz with gear-box)
MWM TCG2020 / TBG620:

  • Electrical output:  1,05 – 2,0 MW
  • V12, V16 y V20
  • 1.500 rpm (50 Hz, 60 Hz with gear-box)
MWM TCG2032 / TBG632:

  • Electrical output: 2,8 – 4,5 MW
  • V12, V16
  • 1.500 rpm (50 Hz, 60 Hz with gear-box)

Maintenance type R3 (Overhaul) on a Guascor gas engine

Mantenimiento-R3-Overhaul-sobre-un-motor-Guascor-de-gas-Maintenance-type-R3-Overhau)-on-a-Guascor-F

Mantenimiento-R3-Overhaul-sobre-un-motor-Guascor-de-gas-Maintenance-type-R3-Overhau)-on-a-Guascor-gas-engine

The major maintenance required by Guascor gas engines is also known as maintenance type R3.

Commonly, this type of preventive maintenance is carried our each 50.400 running hours (whatever the gas the engine consumes).

In this occasion, we show you some pictures of genuine spare parts we used to carry out the engine Overhaul of that Guascor engine in our facilities.

Required labor in our facilities was 1-2 weeks in this case, in order to finish everything. Main repairs, renews, and refurbishments we carried out were the following ones:

  • Renew of main bearings.
  • Renew oil pump and water pump.
  • Renew all pistons, cylinder liners.
  • Refurbishment of con-rods, changing the small end bushings and the bolts.
  • Refurbishment of all cylinder heads.
  • Check status of engine block, crankshaft and camshaft.
  • Renew turbocharger.
  • Generator/alternator standard checking.
  • Renew intercooler.
  • Renew spark plugs, ignition coils and ignition cables.
  • Renew oil filters and air filters.
  • Renew main vibration damper.
  • Renew starter.
  • Renew thermostats.
  • Painting.

Definitely these are the labors needed on a maintenance type R3 of any Guascor engine. Anyway, we could carry out it “on-site” if the customer does not want to ship the engine out of its Power Plant, or in case the execution time is too short.

In short, we hope you trust in «RS Motor» to supply spare parts for your Guascor engine, as well as for refurbishing their parts, or even to carry out all needed preventive and/or corrective maintenances. Many customers already believe in us!.

You can be the next one, try!!!

 

Precio filtros motores de gas y diesel

 


 

40.000 hours maintenance on Jenbacher J620 gas engine

mantenimiento-40000-horas-motor-a-gas-jenbacher-40000-hours-maintenance-on-Jenbacher-J620-gas-engine

mantenimiento-40000-horas-motor-a-gas-jenbacher-40000-hours-maintenance-on-Jenbacher-J620-gas-engine

This time we show you how we usually perform a maintenance type 40.000 running hours on Jenbacher type 6 gas engines, which runs with Natural Gas.

For this type of preventive maintenance, our team goes to the customer’s Power Plant. Anyway, there are some labors which «RS Motor» has to perform in the workshop. These labors are highlighted with the symbol “*”.

40.000 HOURS MAINTENANCE CHECKLIST ON JENBACHER J620 GAS ENGINE

» Disassembly of the intercooler for subsequent delivery to «RS Motor». The intercooler will undergo ultrasound cleaning, which consists of the following steps (*):

  1. Preliminary visual inspection and exterior appearance check.
  2. Preliminary hydraulic test to verify absence of leaks.
  3. Dismantling of all covers.
  4. Replacement of fixing elements.
  5. Repair of female threads of the intercooler tube bundle.
  6. Cleaning of tube bundle and covers by using an ultrasonic cleaning machine.
  7. Renew of water side gaskets.
  8. Inner and outlet painting of water side covers.
  9. Complete assembly of the intercooler, respecting the recommended tightening according to the standard requirements.
  10. Final hydraulic test for 8-12 hours for product validation, prior to its assembly and installation on the engine.

» Replacement of precombustion chambers with their respective O-rings. Removal of cylinder heads on the engine is excluded.

» Replacement of the rocker cover gaskets.

» Intake and exhaust valve timing.

» Degreasing of the gas injection valves.

» Replacement of the rubber springs which have not able for being installed again.

» Renew the actuator linkage.

» Replacement of the main lubricating oil filter.

» Renew throttle valves.

» Replacement of air filters.

» Renew 2x vibration dampers.

» Replacement of the elastic coupling generator-engine.

» Renew crankcase ventilation filters.

» Checking of high connections and wiring.

» Disassembly of the exhaust gas turbocharger and subsequent mounting on the engine. Turbocharger standard maintenance or cleaning can be considered or not, depending on the customer’s decision.

» Cleaning the battery connection terminals.

» Standard refurbishment of the 2x starters with replacement of shaft, bearings, relay and seal (*). Optional.

» Overhaul of the main lubricating oil pump with bushings replacement (*). Optional.

» Replacement of gaskets, screws and other minor spare parts.

» Complete engine assembly.

» Engine connection, commissioning and subsequent checking of control parameters through DIA.NE control system.

 

These are the main steps that «RS Motor» takes into account to perform a 40.000 hours maintenance on Jenbacher type 6 gas engines.

Do not hesitate to ask us for price and availability wherever your engine or power plant is. We are available worldwide. Our field engineers and technicians will do their best with your engine.

If you trust in us, we are sure you will repeat!!! We have several years of experience behind us. For that reason, «RS Motor» is the best alternative to the official engine manufacturer.

 

Precio filtros motores de gas y diesel

 

For Service, the best alternative to the official brand of the engine is «RS Motor»

alternativa a la marca oficial mwm deutz jenbacher guascor

«RS Motor» has a fully equipped workshop in Porriño (Pontevedra, Spain) with the necessary experience, equipment and supplies to perform maintenance works on the gas engines we have under our maintenance or not. We also carry out reconditioning works for the most important elements of the engine.

ENGINE OVERHAULS

An engine overhaul is a major maintenance intervention, where the engine is removed and disassembled part by part, following approved assembly processes. Worn elements are replaced and the reconditioned engine is returned to its initial state of use.

Due to the complexity of the procedure, we generally take the overhauled engine to our workshop. Here we have all the necessary means and equipment to carry out these works with all the guarantees on engines up to 4.50 MW.

Sometimes, and where downtime makes it unfeasible to remove the engine to our workshop, we can perform the overhaul on an exchange block, minimizing downtime-machine and resuming production in minimal time.

RECONDITIONING ENGINES

Reconditioning an engine involves disassembling its mechanical elements, inspecting and verifying the state of the engine, cleaning the mechanical parts with ultrasounds and carrying out controls and/or hydraulic tests. Worn elements are replaced and the reconditioned engine is restored to zero hours.

Engine elements usually reconditioned in the «RS Motor» workshop are:

  • Cylinder heads.
  • Intercoolers.
  • Actuators.
  • Water pumps.
  • Plate heat exchangers.
  • Oil pumps.
  • Starters.
  • Connecting rods (dimensional control & renew of bushings).
  • Zero pressure valves.
  • Water jackets.
  • Throttle valves.
  • Alternators.
  • Gas mixers.
  • Fuel pumps.
  • Nozzles.

In case you need to repair, reconditioning, or carry out a preventive or corrective maintenance, «RS Motor» is specialist on the following brands and types:

  • DEUTZ / MWM TBG616 / TCG2016;
  • DEUTZ / MWM TBG620 / 2020;
  • DEUTZ / MWM TBG632 / 2032;
  • and many more.
  • Jenbacher type 2;
  • Jenbacher type 3;
  • Jenbacher type 4 and,
  • Jenbacher type 6 (it does not matter the number of cylinders).
  • Guascor / Siemens FG / FGLD / SFGLD 180;
  • FG / FGLD / SFGLD / HGM 240;
  • FGLD / SFGLD 360;
  • FGLD / SFGLD 480 and,
  • SFGLD / SFGM / HGM 560.

 
Please, do not hesitate to contact us.

 

Precio filtros motores de gas y diesel

 
 

Maintenance type R1 on a Guascor gas engine type FGLD-240

Mantenimiento-R1-en-un-motor-de-gas-Guascor-Maintenance-on-a-Guascor-gas-engine-type-FGLD-240

Maintenance on a Guascor gas engine type FGLD-240
Today we show you the spare parts that «RS Motor» uses for performing a maintenance type R1 on a Guascor gas engine type FGLD-240.

R1 maintenance needs to be performed each 8.400 running hours in case of biogas engines. In this case, our customer has the engine in a Waste Water Treatment Plant.

The main steps of this maintenance type R1 are the following ones:

  1. Renew main oil filters.
  2. Renew air filters.
  3. Renew spark plugs and ignition cables. This time we choose Denso spark plugs and ignition cables from our “Partner” Motortech.
  4. Refurbishment of the 8x cylinder heads. After that, our team should check the valve lag.
  5. Cleaning of pistons and cylinder liners.
  6. Renew of thermostats.
  7. Turbocharger standard maintenance.
  8. Renew bearings of throttle valve.
  9. Refurbishment of water pump and oil pump.
  10. General checking and other important inspections.
  11. Final commissioning.

In order to achieve the best quality as possible, «RS Motor» supplies and install only Genuine and/or OEM Guascor spare parts.

This is the same for the other brands of engines we usually carry out Service. «RS Motor» is synonym of accuracy and quality thanks to the purchasing DEUTZ/MWM, Jenbacher and Guascor genuine and OEM spare parts.

That is our secret, as well as the years of background we have gotten, working hard from the beginning.

We hope you enjoy! If you need some original spare part, please, contact with «RS Motor». Our team will help to you, for sure!

 

Precio filtros motores de gas y diesel

 

Mantenimiento R1 en un motor de gas Guascor modelo FGLD-240

Jenbacher gas engines, typical intervals for preventive maintenances

Motores-Jenbacher--intervalos-mantenimiento--Jenbacher-gas-engines-intervals-maintenance

Motores-Jenbacher--intervalos-mantenimiento--Jenbacher-gas-engines-intervals-maintenance

In this case we will try to show you the most common intervals of preventive maintenance steps on Jenbacher gas engines.

It is well know that the main Jenbacher engines on the market are: Jenbacher type 3, Jenbacher type 4 and/or Jenbacher type 6. The number of cylinders does not affect to the interval, but this is not the case with the type of gas (natural gas, landfill gas, sewerage gas, coal mine gas, syntgas…).

«RS Motor» is able to perform any type of preventive maintenance on Jenbacher gas engines. Usually preventive maintenances are performed on-site, but in case of Overhaul or major Overhaul, this could be carried out both “on-site” or in the workshop of «RS Motor».

In this case we are going to explain typical operations that «RS Motor» has to take into account when a Jenbacher engine which runs with natural gas needs PREVENTIVE MAINTENANCE.

  • For replacement of expendables/consumables like oil filters, the interval should be about 1.000 – 2.000 running hours. Then, the intermediate maintenances occur each 10.000 running hours.
  • After that, in case of Jenbacher engines type 6, the Overhauls occur at 30K and/or 60K running hours. In this case, renew of pistons, main bearings, cylinder liners… is necessary. These Overhauls can be performed “on-site” or in «RS Motor».

Apart of preventive or scheduled maintenances, sometimes the engine has unexpected failures. When this happens, «RS Motor» goes to the customer’s power plant in order to make some inspections for determining the scope of damage. Then the engine is repair taking into account its history, the running hours, etc. This situation is usually called as CORRECTIVE MAINTENANCE. The key is always to try to shorten the stop time of the power plant due t the fac that each hour the engine is stopped, means a lot of money to the final customer.

In both cases, when you need preventive or corrective maintenances, «RS Motor» is one of the best companies you have to take into account. Our large stock of Jenbacher spare parts and the several years of experience of our field engineers and workshop technicians, can solve the major part of the problems the engine has. Anyway, if the required spare parts are not in our stock, we could offer you different options like refurbished parts (con-rods, intercoolers, pumps, etc.) or supply new parts with a relatively short delivery time.

Please, feel free to contact with «RS Motor» if you have a Jenbacher engine. It does not matter where you are even nowadays. We are able to go to any country of the world.

 

Precio filtros motores de gas y diesel

 

Sales and supply of OEM filters for gas and diesel engines

RS Motor filters

The quality of the filters for gas and diesel engines is one of the most important requirements for a proper performance of an engine.

For this reason, «RS Motor» trades and install on the engines filters with the best quality. It is well known that the best OEM manufacturers for filters are MANN FILTER, Mahle, Donaldson

From oil filters, gas filters, fuel filters, air filters, UPF filters to blow by filters or filters needed for tropic conditions, «RS Motor» is able to supply both Genuine and OEM filters to enlarge the lifespan of the engine whatever the brand is.

You can see in the shown pictures some examples of filters we are able to supply worldwide with the best prices of the market.

Our large experience selling them, allows us to confirm that the quality of filters is directly proportional to the lifespan of the engine whatever the type of gas it consumes.

Precio filtros motores de gas y diesel

 

Do not hesitate, if you need the best filters and you are not able to get them, feel free to ask to «RS Motor». We would be happy to serve you.

«RS Motor» can be your specialized and reputable company for solving this issue!!!.

RS Motor filters

RS Motor filters

Catalysts

catalizadores-motores-cogeneracion-catalysts-reciprocating-engines

Along this article, we want to talk about one of the main enviromental challenges that CHP plants are facing nowadays.

The reduction of pollutants to the atmosphere, is a key aspect within the use of Natural Gas or Biogas Reciprocating Engines to produce Heat and Power.

Thoughout the last years the legislation in terms of Hazard emissions to the atmosphere all over the world has become more restrictive with lower limit values, therefore sometimes is compulsory find Solutions to cut down the different values under the legal limits.

In many cases, the solution that allows be inside the legal emission values is using a catalyst element.

The most common catalyst, are the next:

SELECTIVE CATALYTIC REDUCTION – SCR 

Nitrogen Oxides are commonly the main headache about the atmospheric contamination when we talk about the emissions control of gas engines.

SCR catalyst (selective catalytic reduction), are used to cut down the NOx levels in the exhaust gases. The exhaust gases are mixed with a metered amount of Ad-Blue, afterwards the pollutant gases go throuhgh a Surface of a ceramic honeycomb, coated with noble metals where the NOx are reduced by hydrolysis.

The hydrolysis breaks down the urea, that reacts with the Nitrogen Oxides, turning them into Nitrogen and H2O. To control the levels of NOx a sensor is assembled, thanks to this sensor the Ad-Blue metering is calculated.

The correct Ad-Blue (urea) metering beside their distribution over the catalyst is the key to achive correct pollutant levels.

OXIDATION CATALYST

This kind of catalyst are used to reduce the values of Carbon Monoxide (CO) and un-burnt hydrocarbons, specially formaldehyde.

In the oxidation catalysts, the exhaust gases go through a oxidation element honeycomb, coated with noble metals where the catalytic oxidation is developed to create Hydrogen and Carbon Dioxide, cutting down the Hazard elements in the exhaust gases.

CONCLUSION

With the aim of ensure the engines are running within the legal pollutant limits, producing heat and power on a efficient way, «RS MOTOR» has the ability to carry out catalyst projects for the correct exhaust gas treatmet.

Below you will see some images from a recent instalation of a Oxidation Catalyst carried out by «RS MOTOR».

Catalysts to reduce emissions

Catalysts to reduce emissions

Catalysts to reduce emissions

Catalysts to reduce emissions