For Service, the best alternative to the official brand of the engine is «RS Motor»

alternativa a la marca oficial mwm deutz jenbacher guascor

«RS Motor» has a fully equipped workshop in Porriño (Pontevedra, Spain) with the necessary experience, equipment and supplies to perform maintenance works on the gas engines we have under our maintenance or not. We also carry out reconditioning works for the most important elements of the engine.

ENGINE OVERHAULS

An engine overhaul is a major maintenance intervention, where the engine is removed and disassembled part by part, following approved assembly processes. Worn elements are replaced and the reconditioned engine is returned to its initial state of use.

Due to the complexity of the procedure, we generally take the overhauled engine to our workshop. Here we have all the necessary means and equipment to carry out these works with all the guarantees on engines up to 4.50 MW.

Sometimes, and where downtime makes it unfeasible to remove the engine to our workshop, we can perform the overhaul on an exchange block, minimizing downtime-machine and resuming production in minimal time.

RECONDITIONING ENGINES

Reconditioning an engine involves disassembling its mechanical elements, inspecting and verifying the state of the engine, cleaning the mechanical parts with ultrasounds and carrying out controls and/or hydraulic tests. Worn elements are replaced and the reconditioned engine is restored to zero hours.

Engine elements usually reconditioned in the «RS Motor» workshop are:

  • Cylinder heads.
  • Intercoolers.
  • Actuators.
  • Water pumps.
  • Plate heat exchangers.
  • Oil pumps.
  • Starters.
  • Connecting rods (dimensional control & renew of bushings).
  • Zero pressure valves.
  • Water jackets.
  • Throttle valves.
  • Alternators.
  • Gas mixers.
  • Fuel pumps.
  • Nozzles.

In case you need to repair, reconditioning, or carry out a preventive or corrective maintenance, «RS Motor» is specialist on the following brands and types:

  • DEUTZ / MWM TBG616 / TCG2016;
  • DEUTZ / MWM TBG620 / 2020;
  • DEUTZ / MWM TBG632 / 2032;
  • and many more.
  • Jenbacher type 2;
  • Jenbacher type 3;
  • Jenbacher type 4 and,
  • Jenbacher type 6 (it does not matter the number of cylinders).
  • Guascor / Siemens FG / FGLD / SFGLD 180;
  • FG / FGLD / SFGLD / HGM 240;
  • FGLD / SFGLD 360;
  • FGLD / SFGLD 480 and,
  • SFGLD / SFGM / HGM 560.

 
Please, do not hesitate to contact us.

 

Precio filtros motores de gas y diesel

 
 

Maintenance type R1 on a Guascor gas engine type FGLD-240

Mantenimiento-R1-en-un-motor-de-gas-Guascor-Maintenance-on-a-Guascor-gas-engine-type-FGLD-240

Maintenance on a Guascor gas engine type FGLD-240
Today we show you the spare parts that «RS Motor» uses for performing a maintenance type R1 on a Guascor gas engine type FGLD-240.

R1 maintenance needs to be performed each 8.400 running hours in case of biogas engines. In this case, our customer has the engine in a Waste Water Treatment Plant.

The main steps of this maintenance type R1 are the following ones:

  1. Renew main oil filters.
  2. Renew air filters.
  3. Renew spark plugs and ignition cables. This time we choose Denso spark plugs and ignition cables from our “Partner” Motortech.
  4. Refurbishment of the 8x cylinder heads. After that, our team should check the valve lag.
  5. Cleaning of pistons and cylinder liners.
  6. Renew of thermostats.
  7. Turbocharger standard maintenance.
  8. Renew bearings of throttle valve.
  9. Refurbishment of water pump and oil pump.
  10. General checking and other important inspections.
  11. Final commissioning.

In order to achieve the best quality as possible, «RS Motor» supplies and install only Genuine and/or OEM Guascor spare parts.

This is the same for the other brands of engines we usually carry out Service. «RS Motor» is synonym of accuracy and quality thanks to the purchasing DEUTZ/MWM, Jenbacher and Guascor genuine and OEM spare parts.

That is our secret, as well as the years of background we have gotten, working hard from the beginning.

We hope you enjoy! If you need some original spare part, please, contact with «RS Motor». Our team will help to you, for sure!

 

Precio filtros motores de gas y diesel

 

Mantenimiento R1 en un motor de gas Guascor modelo FGLD-240

Jenbacher gas engines, typical intervals for preventive maintenances

Motores-Jenbacher--intervalos-mantenimiento--Jenbacher-gas-engines-intervals-maintenance

Motores-Jenbacher--intervalos-mantenimiento--Jenbacher-gas-engines-intervals-maintenance

In this case we will try to show you the most common intervals of preventive maintenance steps on Jenbacher gas engines.

It is well know that the main Jenbacher engines on the market are: Jenbacher type 3, Jenbacher type 4 and/or Jenbacher type 6. The number of cylinders does not affect to the interval, but this is not the case with the type of gas (natural gas, landfill gas, sewerage gas, coal mine gas, syntgas…).

«RS Motor» is able to perform any type of preventive maintenance on Jenbacher gas engines. Usually preventive maintenances are performed on-site, but in case of Overhaul or major Overhaul, this could be carried out both “on-site” or in the workshop of «RS Motor».

In this case we are going to explain typical operations that «RS Motor» has to take into account when a Jenbacher engine which runs with natural gas needs PREVENTIVE MAINTENANCE.

  • For replacement of expendables/consumables like oil filters, the interval should be about 1.000 – 2.000 running hours. Then, the intermediate maintenances occur each 10.000 running hours.
  • After that, in case of Jenbacher engines type 6, the Overhauls occur at 30K and/or 60K running hours. In this case, renew of pistons, main bearings, cylinder liners… is necessary. These Overhauls can be performed “on-site” or in «RS Motor».

Apart of preventive or scheduled maintenances, sometimes the engine has unexpected failures. When this happens, «RS Motor» goes to the customer’s power plant in order to make some inspections for determining the scope of damage. Then the engine is repair taking into account its history, the running hours, etc. This situation is usually called as CORRECTIVE MAINTENANCE. The key is always to try to shorten the stop time of the power plant due t the fac that each hour the engine is stopped, means a lot of money to the final customer.

In both cases, when you need preventive or corrective maintenances, «RS Motor» is one of the best companies you have to take into account. Our large stock of Jenbacher spare parts and the several years of experience of our field engineers and workshop technicians, can solve the major part of the problems the engine has. Anyway, if the required spare parts are not in our stock, we could offer you different options like refurbished parts (con-rods, intercoolers, pumps, etc.) or supply new parts with a relatively short delivery time.

Please, feel free to contact with «RS Motor» if you have a Jenbacher engine. It does not matter where you are even nowadays. We are able to go to any country of the world.

 

Precio filtros motores de gas y diesel

 

Sales and supply of OEM filters for gas and diesel engines

RS Motor filters

The quality of the filters for gas and diesel engines is one of the most important requirements for a proper performance of an engine.

For this reason, «RS Motor» trades and install on the engines filters with the best quality. It is well known that the best OEM manufacturers for filters are MANN FILTER, Mahle, Donaldson

From oil filters, gas filters, fuel filters, air filters, UPF filters to blow by filters or filters needed for tropic conditions, «RS Motor» is able to supply both Genuine and OEM filters to enlarge the lifespan of the engine whatever the brand is.

You can see in the shown pictures some examples of filters we are able to supply worldwide with the best prices of the market.

Our large experience selling them, allows us to confirm that the quality of filters is directly proportional to the lifespan of the engine whatever the type of gas it consumes.

Precio filtros motores de gas y diesel

 

Do not hesitate, if you need the best filters and you are not able to get them, feel free to ask to «RS Motor». We would be happy to serve you.

«RS Motor» can be your specialized and reputable company for solving this issue!!!.

RS Motor filters

RS Motor filters

Engine repair using an exchange “shortblock” assembled in origin

eparación-con-shortblock-en-motor-de-gas-Jenbacher-J620

Engine-repair-using-an-exchange-shortblock-assembled-in-origin

This time we show you one of the biggest repairs of year 2020. In this case, the labor was carried out on a Jenbacher J620 gas engine. In order to shorten the execution time, RS Motor installs to the customer 1x exchange “shortblock” assembled in Jenbacher.

Thanks to this, the execution time of the complete repair, on which the crankshaft of the engine of the customer was damaged, was less than 2 weeks. This is something that only few companies can carry out successfully.

In this occasion the repair was on a Jenbacher gas engine, but anyway, RS Motor has done this type of repairs many times in other Jenbacher engines and of course, in DEUTZ / MWM engines.

The exchange “shortblock/longblock” or engine exchange program of RS Motor, allows to the customers to reduce the stop time of the power plant, saving several thousands of € as a positive consequence.

The specialized team of RS Motor is able to adapt the solutions taking into account the extent of damage of the engine of the customer. Also in many cases, the install of previously Overhauled engines, is widespread when a major Overhaul is needed.

Finally, it is well know that after installing a new engine on a power plant, or after performing an engine overhaul whatever the chosen way is, the commissioning must be performed carefully. All steps from the dismantling to the final start-up are carried out by our field and/or workshop engineers and technicians. Spare parts are always original (OEM or genuine). As a consequence, RS Motor guarantees the labor, supporting us in terms of quality and an accurate execution.

Now, we are happy to show you some awesome pictures of the exchange engine “shortblock” assembled in origin (purchased directly from Jenbacher).

Also, more engines are available on this button:

venta-de-motores-usados-used-engines-for-sale-mwm-deutz-jenbacher

We hope you enjoy! Ask to us for an offer of what you need!

Jenbacher gas engines, since 2011

specialist-in-Jenbacher-gas-engines-especialistas-en-motores-de-gas-Jenbacher

specialist in Jenbacher gas engines especialistas en motores de gas Jenbacher

Jenbacher engines are one of the main business of ««RS Motor»». Trading with genuine and/or OEM parts and carrying out Service (preventive/corrective maintenance, repairs, refurbishments…) for these type of engines, allow to «RS Motor» to be the best alternative to the official brand Jenbacher since 2011.

Our customers from Spain, Portugal, and the rest of the world can confirm the efficiency of «RS Motor».

Moreover, the three brands we represent (AVAT, Heinzmann and Motortech) offer some of the best quality OEM products for Jenbacher engines. From ignition cables to actuators, and of course the innovative open and flexible solution of the DIA.NE replacement developed by AVAT (E²CON-GE), give to «RS Motor» the best knowledge available on the current cogeneration market.

On the other hand, we show you our new section in our webpage www.rsmotor.es/eng. This section presents the engines we have available. There are Jenbacher engines, MWM engines, and we hope in the future include much more brands.

Don’t forget!, If you have one of more of the following Jenbacher gas engines:

  • Jenbacher J208,
  • Jenbacher J212,
  • Jenbacher J312,
  • Jenbacher J316,
  • Jenbacher J320,
  • Jenbacher J412,
  • Jenbacher J416,
  • Jenbacher J420,
  • Jenbacher J612,
  • Jenbacher J616,
  • Jenbacher J620,

and you need parts, service, a whole engine, repair of parts like intercoolers, pumps, starters…do not hesitate to contact us!!!

Wide stock of OEM & genuine parts for gas and diesel engines

«RS Motor Power Solutions», specialized company on spare part sales worldwide for diesel and gas engines.

Since 2008, we are specialized on selling original spare parts mainly for:

  • DEUTZ/MWM engines,
  • Jenbacher engines and
  • Guascor engines.

The quality of our products in combination with a high quality Service, allows to «RS Motor Power Solutions» to growth every year.

Do not hesitate to ask to us for price of spare parts and/or service whatever your engine or power plant are. We will give you a fast and accurate answer.

Moreover, as AVAT, Motortech and Heinzmann are our partners, we can offer you the best prices for the parts of these brands (Motortech and Heinzmann only for Spain and Portugal).

Nowadays, we have hired more than 200 engines worldwide for making service and selling spare parts, apart from the customers for who we only sell spare parts.

Do not hesitate to contact with us, we are sure that you will repeat!. See more details in our LinkedIn or Facebook profiles.

offer-request-guascor-mwm-deutz-and-jenbacher-spare-parts-sale

 

30.000 hours maintenance on a Jenbacher 620 gas engine “on-site”

overhaul-on-a-Jenbacher-620-gas-engine-motor-de-gas-jenbacher-J620

This time we show you some pictures about a 30.000 hours maintenance “on-site”. The team of «RS Motor» is executing an engine Overhaul on a Jenbacher J620 engine in the Power Plant of the customer.

For doing this, our team renews main bearings, con-rod bearings, pistons, cylinder liners, refurbish the intercooler, all con-rods, the main oil pump… All refurbishments are performed in the workshop of «RS Motor», while the installation of new parts is done “on-site” thanks to the use of specific and special tools which are adapted to carry out this maintenance.

All this labor takes around 2-3 weeks as usually. Spare parts are always original (OEM or genuine). Thanks to this, we can guarantee the labor supporting us in terms of quality and an accurate execution.

Apart of the execution of this engine Overhaul “on-site”, the workshop team of «RS Motor» is also performing some refurbishments on cylinder heads for Jenbacher type 3 and Jenbacher type 4. The wide stock of the warehouse of «RS Motor» allows to accomplish in a short time period any type of repair or maintenance. This is our daily work on our workshop (sometimes we refurbish cylinder heads, sometimes our team cleans intercoolers, sometimes we repair big piston seizures on engines, sometimes we clean flame arresters, repair starters, actuators, throttle valves, mixing valves, water pumps, exhaust gas heat exchangers, fuel pumps, injectors, oil pumps…).

We hope you enjoy with the pictures!.

OFFER REQUEST: OVERHAUL ON A JENBACHER J620 GAS ENGINE

offer-request-overhaul-on-a-Jenbacher-620-gas-engine-motor-de-gas-jenbacher-J620

Specialist on Jenbacher gas engines: maintenance, reconditioning and spare parts sale

Trabajos-y-venta-de-repuestos-en-motores-a-gas-Jenbacher

Like in DEUTZ/MWM and GUASCOR engines, RS Motor is also specialist on Jenbacher gas engines.

The use of genuine and OEM spare parts and the acquired experience allow us to perform any type of preventive or corrective maintenance whatever the Jenbacher engine type is.

The most common Jenbacher engines we work in our facilities and “on-site” are:

  • Jenbacher type 2 (J208),
  • Jenbacher type 3 (J312, J316 and J320) and
  • Jenbacher type 6 (J612, J616 and J620).

Apart of carrying out maintenances in those type of gas engines, RS Motor is able to refurbish separately each part of the engine (cylinder heads, connecting rods, main oil pumps, water pumps, starters, actuators, heat plate exchangers, intercoolers..) always using OEM and genuine spare parts. We also supply some exchange parts such cylinder heads, con-rods… and many times we can supply Jenbacher shortblocks/longblocks (according to availability).

Finally, and to conclude, we show you some pictures of our works, repairs and regular checks on Jenbacher gas engines. Enjoy them!!!

Rremembering our assistance to EMAF 2018 (Porto)

EMAF-PORTO-2018-RS-MOTOR

Some pictures of RS Motor’s first exhibition at EMAF, Porto (Portugal). Just a year ago we were together with our Portuguese neighbors exhibiting Jenbacher type 3 and Jenbacher type 4 cylinder heads, in addition to a Jenbacher type 3 intercooler.

In addition, we showed to the attendees a DEUTZ TBG616V8K engine with Motortech equipment:

  • Motortech spark plugs,
  • Motortech ignition cables,
  • Motortech Varifuel mixing system and
  • MIC Ignition box.

Apart from that, we showed several of the products and actuators from Heinzmann like the Heinzmann STG30, Heinzmann STG40, Heinzmann STG2080

Regarding DEUTZ / MWM spare parts, there were TBG620 / TCG2020, TBG616 / TCG2016 intercoolers and TBG616, TCG2016, TBG620, TCG2020 both new and exchange.

The previous elements shared a stand with the AVAT control system, the company responsible for the development of TEM-Evo in MWM engines. Being our “Certified System Partner”, we are completely able to carry out both replacements and updates (Retrofit) with the AVAT’s wide range of products and RS Motor’s experience since more than 10 years.

Finally, we would like to thank everyone who visited us at the fair again, and we hope that in case of returning to it, they will see us now and as new customers.