The major maintenance required by Guascor gas engines is also known as maintenance type R3.
Commonly, this type of preventive maintenance is carried our each 50.400 running hours (whatever the gas the engine consumes).
In this occasion, we show you some pictures of genuine spare parts we used to carry out the engine Overhaul of that Guascor engine in our facilities.
Required labor in our facilities was 1-2 weeks in this case, in order to finish everything. Main repairs, renews, and refurbishments we carried out were the following ones:
- Renew of main bearings.
- Renew oil pump and water pump.
- Renew all pistons, cylinder liners.
- Refurbishment of con-rods, changing the small end bushings and the bolts.
- Refurbishment of all cylinder heads.
- Check status of engine block, crankshaft and camshaft.
- Renew turbocharger.
- Generator/alternator standard checking.
- Renew intercooler.
- Renew spark plugs, ignition coils and ignition cables.
- Renew oil filters and air filters.
- Renew main vibration damper.
- Renew starter.
- Renew thermostats.
Definitely these are the labors needed on a maintenance type R3 of any Guascor engine. Anyway, we could carry out it “on-site” if the customer does not want to ship the engine out of its Power Plant, or in case the execution time is too short.
In short, we hope you trust in «RS Motor» to supply spare parts for your Guascor engine, as well as for refurbishing their parts, or even to carry out all needed preventive and/or corrective maintenances. Many customers already believe in us!.
You can be the next one, try!!!
«RS Motor» has a fully equipped workshop in Porriño (Pontevedra, Spain) with the necessary experience, equipment and supplies to perform maintenance works on the gas engines we have under our maintenance or not. We also carry out reconditioning works for the most important elements of the engine.
An engine overhaul is a major maintenance intervention, where the engine is removed and disassembled part by part, following approved assembly processes. Worn elements are replaced and the reconditioned engine is returned to its initial state of use.
Due to the complexity of the procedure, we generally take the overhauled engine to our workshop. Here we have all the necessary means and equipment to carry out these works with all the guarantees on engines up to 4.50 MW.
Sometimes, and where downtime makes it unfeasible to remove the engine to our workshop, we can perform the overhaul on an exchange block, minimizing downtime-machine and resuming production in minimal time.
Reconditioning an engine involves disassembling its mechanical elements, inspecting and verifying the state of the engine, cleaning the mechanical parts with ultrasounds and carrying out controls and/or hydraulic tests. Worn elements are replaced and the reconditioned engine is restored to zero hours.
Engine elements usually reconditioned in the «RS Motor» workshop are:
- Cylinder heads.
- Water pumps.
- Plate heat exchangers.
- Oil pumps.
- Connecting rods (dimensional control & renew of bushings).
- Zero pressure valves.
- Water jackets.
- Throttle valves.
- Gas mixers.
- Fuel pumps.
In case you need to repair, reconditioning, or carry out a preventive or corrective maintenance, «RS Motor» is specialist on the following brands and types:
- DEUTZ / MWM TBG616 / TCG2016;
- DEUTZ / MWM TBG620 / 2020;
- DEUTZ / MWM TBG632 / 2032;
- and many more.
- Jenbacher type 2;
- Jenbacher type 3;
- Jenbacher type 4 and,
- Jenbacher type 6 (it does not matter the number of cylinders).
- Guascor / Siemens FG / FGLD / SFGLD 180;
- FG / FGLD / SFGLD / HGM 240;
- FGLD / SFGLD 360;
- FGLD / SFGLD 480 and,
- SFGLD / SFGM / HGM 560.
Please, do not hesitate to contact us.
Today we show you the spare parts that «RS Motor» uses for performing a maintenance type R1 on a Guascor gas engine type FGLD-240.
R1 maintenance needs to be performed each 8.400 running hours in case of biogas engines. In this case, our customer has the engine in a Waste Water Treatment Plant.
The main steps of this maintenance type R1 are the following ones:
- Renew main oil filters.
- Renew air filters.
- Renew spark plugs and ignition cables. This time we choose Denso spark plugs and ignition cables from our “Partner” Motortech.
- Refurbishment of the 8x cylinder heads. After that, our team should check the valve lag.
- Cleaning of pistons and cylinder liners.
- Renew of thermostats.
- Turbocharger standard maintenance.
- Renew bearings of throttle valve.
- Refurbishment of water pump and oil pump.
- General checking and other important inspections.
- Final commissioning.
In order to achieve the best quality as possible, «RS Motor» supplies and install only Genuine and/or OEM Guascor spare parts.
This is the same for the other brands of engines we usually carry out Service. «RS Motor» is synonym of accuracy and quality thanks to the purchasing DEUTZ/MWM, Jenbacher and Guascor genuine and OEM spare parts.
That is our secret, as well as the years of background we have gotten, working hard from the beginning.
We hope you enjoy! If you need some original spare part, please, contact with «RS Motor». Our team will help to you, for sure!
The quality of the filters for gas and diesel engines is one of the most important requirements for a proper performance of an engine.
For this reason, «RS Motor» trades and install on the engines filters with the best quality. It is well known that the best OEM manufacturers for filters are MANN FILTER, Mahle, Donaldson…
From oil filters, gas filters, fuel filters, air filters, UPF filters to blow by filters or filters needed for tropic conditions, «RS Motor» is able to supply both Genuine and OEM filters to enlarge the lifespan of the engine whatever the brand is.
You can see in the shown pictures some examples of filters we are able to supply worldwide with the best prices of the market.
Our large experience selling them, allows us to confirm that the quality of filters is directly proportional to the lifespan of the engine whatever the type of gas it consumes.
Do not hesitate, if you need the best filters and you are not able to get them, feel free to ask to «RS Motor». We would be happy to serve you.
«RS Motor» can be your specialized and reputable company for solving this issue!!!.
Guascor or Siemens gas engines, are another of the main business of «RS Motor».
Nowadays, the company «RS Motor» is specialized on preventive and/or corrective maintenances on these type of engines. Linked to this, the supply of parts is also essential in order to give the best answer as possible.
Related with Guascor engines, the story begins by carrying out maintenances on engines located near to our workshop. Little by little, we grew thanks to the acquired experience until now, reaching the point that we are able to supply Guascor/Siemens parts worldwide.
The supply of genuine and OEM spare parts to our customers, and the use of them on preventive maintenances, corrective maintenances and different repairs both on-site and in our own workshop, makes «RS Motor» to be one of the best alternatives to the official brand Guascor/Siemens.
«RS Motor» is expert on performing service and selling spare parts for any kind of Guascor/Siemens engine, but we highlight the following models:
- FG/FGLD/SFGLD 180
- FG/FGLD/SFGLD/HGM 240
- FGLD/SFGLD 360
- FGLD/SFGLD 480
- SFGLD/SFGM/HGM 560
Then if you have a Guascor/Siemens engine and you want to buy parts, or hire service from the best alternative to the official brand, please, call/write to «RS Motor» wherever your engine is.
This week, the «RS Motor» team is performing a R2 maintenance on a GUASCOR FG-180 engine.
In this maintenance step, our team will install new pistons, new liners, new connecting rod bearings, ignition cables, spark plugs… About the labor in our own workshop, the refurbishment of cylinder heads, water pumps and oil cooler is also essential and needed.
As usually, using Genuine or OEM parts we are going to reach the best quality, giving to the customer a good guarantee for a lot of years.
Thanks to our specific tools for GUASCOR engines, we can finish the labor in few days.
Then the engine is ready for running a lot of hours until the next big maintenance (R1).
OFFER REQUEST: R2 MAINTENANCE ON A GUASCOR/SIEMENS ENGINE
Don’t forget!!, If you need the best Service on GUASCOR/ SIEMENS engines (whatever the engine type and/or maintenance), please, ask to «RS Motor» for price and availability. We are sure you will repeat.
«RS Motor Power Solutions», specialized company on spare part sales worldwide for diesel and gas engines.
Since 2008, we are specialized on selling original spare parts mainly for:
- DEUTZ/MWM engines,
- Jenbacher engines and
- Guascor engines.
The quality of our products in combination with a high quality Service, allows to «RS Motor Power Solutions» to growth every year.
Do not hesitate to ask to us for price of spare parts and/or service whatever your engine or power plant are. We will give you a fast and accurate answer.
Moreover, as AVAT, Motortech and Heinzmann are our partners, we can offer you the best prices for the parts of these brands (Motortech and Heinzmann only for Spain and Portugal).
Nowadays, we have hired more than 200 engines worldwide for making service and selling spare parts, apart from the customers for who we only sell spare parts.
Do not hesitate to contact with us, we are sure that you will repeat!. See more details in our LinkedIn or Facebook profiles.
This time we show you some of original spare parts we use for install on GUASCOR engines:
- cylinder head gasket set,
- cylinder head reconditioning kit,
- rotary shaft lip seal,
- oil filter,
- water pump sealing kit,
- piston rings set,
- cylinder liner,
- Denso spark plugs,
- and many more…
«RS Motor» sells worldwide original spare parts for GUASCOR engines when customers ask for a quotation. In many cases, this is not enough so we go to the customer’s Power Plant in order to install them, or we install them if the engine of the customer comes to the workshop of «RS Motor».
Our large experience with this kind of engines allows us to accomplish any challenge with them. From small maintenances (E type) to big maintenances (R type) the quality of our labor is always the best.
For GUASCOR engines, the star product «RS Motor» is selling are the DENSO spark plugs. We are selling them worldwide and also, we use them when we make the service on the engines we have hired for both short and long time.
So if you want original spare parts and Service with a quality like the engine manufacturer offers, choose «RS Motor»!. Our team of engineers will not disappoint you.
In many cases we exceed the engine availability in comparison with the availability that the engine manufacturer gives.
Trust in «RS Motor» if you have any GUASCOR engine, we are sure that you will repeat!!!
As a specialized company on DEUTZ/MWM and Jenbacher engines, this time we show you we are also proficient on GUASCOR diesel and gas engines.
«RS Motor» is able to carry out any type of preventive and corrective maintenance on GUASCOR engines (in workshop or “on-site”).
About preventive maintenances, from E1 to R3 (Overhaul), the team of «RS Motor» can solve any issue by using always original spare parts (genuine and OEM).
Thanks to our several years of experience, many customers trust in us to repair any part of their GUASCOR engines.
The refurbishment of cylinder heads, intercoolers, water pumps, starters, con-rods… is our daily labor.
We always try to achieve the best final results thanks to our specific tools. These tools allow to our engineers to shorten the delivery time and to work efficiently and with the maximum precision and accuracy.
Apart of labor on GUASCOR engines, we are able to supply spare parts worldwide respecting always the maximum quality, i.e, with OEM and genuine spare parts.