The major maintenance required by Guascor gas engines is also known as maintenance type R3.
Commonly, this type of preventive maintenance is carried our each 50.400 running hours (whatever the gas the engine consumes).
In this occasion, we show you some pictures of genuine spare parts we used to carry out the engine Overhaul of that Guascor engine in our facilities.
Required labor in our facilities was 1-2 weeks in this case, in order to finish everything. Main repairs, renews, and refurbishments we carried out were the following ones:
- Renew of main bearings.
- Renew oil pump and water pump.
- Renew all pistons, cylinder liners.
- Refurbishment of con-rods, changing the small end bushings and the bolts.
- Refurbishment of all cylinder heads.
- Check status of engine block, crankshaft and camshaft.
- Renew turbocharger.
- Generator/alternator standard checking.
- Renew intercooler.
- Renew spark plugs, ignition coils and ignition cables.
- Renew oil filters and air filters.
- Renew main vibration damper.
- Renew starter.
- Renew thermostats.
Definitely these are the labors needed on a maintenance type R3 of any Guascor engine. Anyway, we could carry out it “on-site” if the customer does not want to ship the engine out of its Power Plant, or in case the execution time is too short.
In short, we hope you trust in «RS Motor» to supply spare parts for your Guascor engine, as well as for refurbishing their parts, or even to carry out all needed preventive and/or corrective maintenances. Many customers already believe in us!.
You can be the next one, try!!!
Today we show you the spare parts that «RS Motor» uses for performing a maintenance type R1 on a Guascor gas engine type FGLD-240.
R1 maintenance needs to be performed each 8.400 running hours in case of biogas engines. In this case, our customer has the engine in a Waste Water Treatment Plant.
The main steps of this maintenance type R1 are the following ones:
- Renew main oil filters.
- Renew air filters.
- Renew spark plugs and ignition cables. This time we choose Denso spark plugs and ignition cables from our “Partner” Motortech.
- Refurbishment of the 8x cylinder heads. After that, our team should check the valve lag.
- Cleaning of pistons and cylinder liners.
- Renew of thermostats.
- Turbocharger standard maintenance.
- Renew bearings of throttle valve.
- Refurbishment of water pump and oil pump.
- General checking and other important inspections.
- Final commissioning.
In order to achieve the best quality as possible, «RS Motor» supplies and install only Genuine and/or OEM Guascor spare parts.
This is the same for the other brands of engines we usually carry out Service. «RS Motor» is synonym of accuracy and quality thanks to the purchasing DEUTZ/MWM, Jenbacher and Guascor genuine and OEM spare parts.
That is our secret, as well as the years of background we have gotten, working hard from the beginning.
We hope you enjoy! If you need some original spare part, please, contact with «RS Motor». Our team will help to you, for sure!
This week we show you few examples of different refurbishments and repairs. As you can see in the pictures, «RS Motor» is able to repair and refurbish spare parts and engine parts of DEUTZ/MWM, Jenbacher and Guascor engines.
As we have shown you many times, in our own workshop of more than 750 m2 and thanks to the specific equipment, the quality of all repairs and refurbishments is unbeatable.
The «RS Motor» team is able to carry out at the same time different labors in also different engines. The most common engines we Overhaul in our facilities are:
- Deutz/MWM TBG616/TCG2016,
- Deutz/MWM TBG620/TCG2020,
- Deutz/MWM TBG632/TCG2032,
- Deutz TBD616/TBD620,
- Jenbacher type 3,
- Jenbacher type 4,
- Jenbacher type 6,
- Guascor FG, FGLD, SFGLD, HGM, SFGM ….
whatever the number of cylinders.
Every passing day «RS Motor» is improving the quality of the labor thanks to the continuous formation of our specialized technicians and engineers.
Our team is composed by highly qualified workshop technicians, field engineers, field technicians…All of them with several years of experience. Every technician or engineer of «RS Motor»r uses always original spare parts (genuine and/or OEM) purchased by the «RS Motor» technical buyers, who are always looking for the best quality products available in the market.
The final result is that, joining forces, the team of «RS Motor» results as the best alternative to the manufacturer of the engine.
Enjoy the pictures of some refurbishments in the workshop!!!
This time we show you some of original spare parts we use for install on GUASCOR engines:
- cylinder head gasket set,
- cylinder head reconditioning kit,
- rotary shaft lip seal,
- oil filter,
- water pump sealing kit,
- piston rings set,
- cylinder liner,
- Denso spark plugs,
- and many more…
«RS Motor» sells worldwide original spare parts for GUASCOR engines when customers ask for a quotation. In many cases, this is not enough so we go to the customer’s Power Plant in order to install them, or we install them if the engine of the customer comes to the workshop of «RS Motor».
Our large experience with this kind of engines allows us to accomplish any challenge with them. From small maintenances (E type) to big maintenances (R type) the quality of our labor is always the best.
For GUASCOR engines, the star product «RS Motor» is selling are the DENSO spark plugs. We are selling them worldwide and also, we use them when we make the service on the engines we have hired for both short and long time.
So if you want original spare parts and Service with a quality like the engine manufacturer offers, choose «RS Motor»!. Our team of engineers will not disappoint you.
In many cases we exceed the engine availability in comparison with the availability that the engine manufacturer gives.
Trust in «RS Motor» if you have any GUASCOR engine, we are sure that you will repeat!!!