Maintenance type R3 (Overhaul) on a Guascor gas engine

Mantenimiento-R3-Overhaul-sobre-un-motor-Guascor-de-gas-Maintenance-type-R3-Overhau)-on-a-Guascor-F

Mantenimiento-R3-Overhaul-sobre-un-motor-Guascor-de-gas-Maintenance-type-R3-Overhau)-on-a-Guascor-gas-engine

The major maintenance required by Guascor gas engines is also known as maintenance type R3.

Commonly, this type of preventive maintenance is carried our each 50.400 running hours (whatever the gas the engine consumes).

In this occasion, we show you some pictures of genuine spare parts we used to carry out the engine Overhaul of that Guascor engine in our facilities.

Required labor in our facilities was 1-2 weeks in this case, in order to finish everything. Main repairs, renews, and refurbishments we carried out were the following ones:

  • Renew of main bearings.
  • Renew oil pump and water pump.
  • Renew all pistons, cylinder liners.
  • Refurbishment of con-rods, changing the small end bushings and the bolts.
  • Refurbishment of all cylinder heads.
  • Check status of engine block, crankshaft and camshaft.
  • Renew turbocharger.
  • Generator/alternator standard checking.
  • Renew intercooler.
  • Renew spark plugs, ignition coils and ignition cables.
  • Renew oil filters and air filters.
  • Renew main vibration damper.
  • Renew starter.
  • Renew thermostats.
  • Painting.

Definitely these are the labors needed on a maintenance type R3 of any Guascor engine. Anyway, we could carry out it “on-site” if the customer does not want to ship the engine out of its Power Plant, or in case the execution time is too short.

In short, we hope you trust in «RS Motor» to supply spare parts for your Guascor engine, as well as for refurbishing their parts, or even to carry out all needed preventive and/or corrective maintenances. Many customers already believe in us!.

You can be the next one, try!!!

 

Precio filtros motores de gas y diesel

 


 

Supply of spare parts and Service on GUASCOR / SIEMENS gas engines

specialist-in-Guascor-Siemens-gas-engines-especialistas-en-motores-de-gas-Guascor-Siemens

Guascor or Siemens gas engines, are another of the main business of «RS Motor».

Nowadays, the company «RS Motor» is specialized on preventive and/or corrective maintenances on these type of engines. Linked to this, the supply of parts is also essential in order to give the best answer as possible.

Related with Guascor engines, the story begins by carrying out maintenances on engines located near to our workshop. Little by little, we grew thanks to the acquired experience until now, reaching the point that we are able to supply Guascor/Siemens parts worldwide.

The supply of genuine and OEM spare parts to our customers, and the use of them on preventive maintenances, corrective maintenances and different repairs both on-site and in our own workshop, makes «RS Motor» to be one of the best alternatives to the official brand Guascor/Siemens.

«RS Motor» is expert on performing service and selling spare parts for any kind of Guascor/Siemens engine, but we highlight the following models:

  • FG/FGLD/SFGLD 180
  • FG/FGLD/SFGLD/HGM 240
  • FGLD/SFGLD 360
  • FGLD/SFGLD 480
  • SFGLD/SFGM/HGM 560

Then if you have a Guascor/Siemens engine and you want to buy parts, or hire service from the best alternative to the official brand, please, call/write to «RS Motor» wherever your engine is.

Daily refurbishments and repairs in RS Motor

engines-refurbishments-and-repairs-reacondicionados-y-reparaciones-de-motores

This week we show you few examples of different refurbishments and repairs. As you can see in the pictures, «RS Motor» is able to repair and refurbish spare parts and engine parts of DEUTZ/MWM, Jenbacher and Guascor engines.

As we have shown you many times, in our own workshop of more than 750 m2 and thanks to the specific equipment, the quality of all repairs and refurbishments is unbeatable.

The «RS Motor» team is able to carry out at the same time different labors in also different engines. The most common engines we Overhaul in our facilities are:

  • Deutz/MWM TBG616/TCG2016,
  • Deutz/MWM TBG620/TCG2020,
  • Deutz/MWM TBG632/TCG2032,
  • Deutz TBD616/TBD620,
  • Jenbacher type 3,
  • Jenbacher type 4,
  • Jenbacher type 6,
  • Guascor FG, FGLD, SFGLD, HGM, SFGM ….

whatever the number of cylinders.

Every passing day «RS Motor» is improving the quality of the labor thanks to the continuous formation of our specialized technicians and engineers.

Our team is composed by highly qualified workshop technicians, field engineers, field technicians…All of them with several years of experience. Every technician or engineer of «RS Motor»r uses always original spare parts (genuine and/or OEM) purchased by the «RS Motor» technical buyers, who are always looking for the best quality products available in the market.

The final result is that, joining forces, the team of «RS Motor» results as the best alternative to the manufacturer of the engine.

Enjoy the pictures of some refurbishments in the workshop!!!

R2 maintenance on a GUASCOR engine type FG-180

R2-maintenance-on-a-GUASCOR-engine-type-FG-180-mantenimiento-r2-motor-guascor-fg-180

This week, the «RS Motor» team is performing a R2 maintenance on a GUASCOR FG-180 engine.

In this maintenance step, our team will install new pistons, new liners, new connecting rod bearings, ignition cables, spark plugs… About the labor in our own workshop, the refurbishment of cylinder heads, water pumps and oil cooler is also essential and needed.

As usually, using Genuine or OEM parts we are going to reach the best quality, giving to the customer a good guarantee for a lot of years.

Thanks to our specific tools for GUASCOR engines, we can finish the labor in few days.

Then the engine is ready for running a lot of hours until the next big maintenance (R1).

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

R2 maintenance on a GUASCOR engine type FG-180 mantenimiento r2 motor guascor fg-180

OFFER REQUEST: R2 MAINTENANCE ON A GUASCOR/SIEMENS ENGINE

Don’t forget!!, If you need the best Service on GUASCOR/ SIEMENS engines (whatever the engine type and/or maintenance), please, ask to «RS Motor» for price and availability. We are sure you will repeat.

offer-request-guascor-engines

Specialist on GUASCOR gas and diesel engines: maintenance, refurbishment and spare parts sales

Trabajos-y-venta-de-repuestos-en-motores-a-gas-y-diesel-guascor

As a specialized company on DEUTZ/MWM and Jenbacher engines, this time we show you we are also proficient on GUASCOR diesel and gas engines.

«RS Motor» is able to carry out any type of preventive and corrective maintenance on GUASCOR engines (in workshop or “on-site”).

About preventive maintenances, from E1 to R3 (Overhaul), the team of «RS Motor» can solve any issue by using always original spare parts (genuine and OEM).

Thanks to our several years of experience, many customers trust in us to repair any part of their GUASCOR engines.

The refurbishment of cylinder heads, intercoolers, water pumps, starters, con-rods… is our daily labor.

We always try to achieve the best final results thanks to our specific tools. These tools allow to our engineers to shorten the delivery time and to work efficiently and with the maximum precision and accuracy.

Apart of labor on GUASCOR engines, we are able to supply spare parts worldwide respecting always the maximum quality, i.e, with OEM and genuine spare parts.

 

offer-request-guascor-engines

Rremembering our assistance to EMAF 2018 (Porto)

EMAF-PORTO-2018-RS-MOTOR

Some pictures of RS Motor’s first exhibition at EMAF, Porto (Portugal). Just a year ago we were together with our Portuguese neighbors exhibiting Jenbacher type 3 and Jenbacher type 4 cylinder heads, in addition to a Jenbacher type 3 intercooler.

In addition, we showed to the attendees a DEUTZ TBG616V8K engine with Motortech equipment:

  • Motortech spark plugs,
  • Motortech ignition cables,
  • Motortech Varifuel mixing system and
  • MIC Ignition box.

Apart from that, we showed several of the products and actuators from Heinzmann like the Heinzmann STG30, Heinzmann STG40, Heinzmann STG2080

Regarding DEUTZ / MWM spare parts, there were TBG620 / TCG2020, TBG616 / TCG2016 intercoolers and TBG616, TCG2016, TBG620, TCG2020 both new and exchange.

The previous elements shared a stand with the AVAT control system, the company responsible for the development of TEM-Evo in MWM engines. Being our “Certified System Partner”, we are completely able to carry out both replacements and updates (Retrofit) with the AVAT’s wide range of products and RS Motor’s experience since more than 10 years.

Finally, we would like to thank everyone who visited us at the fair again, and we hope that in case of returning to it, they will see us now and as new customers.

MOTORTECH Spark Plug Cleaning Kit

Kit-de-Limpieza-de-Bujías-de-MOTORTECH

As the current Official Distributor of MOTORTECH products for Spain and Portugal, RS MOTOR shows on its website the “MOTORTECH Spark Plug Cleaning Kit”:

This MOTORTECH kit is supplied by RS MOTOR to clean the spark plugs on the DEUTZ, MWM, Jenbacher and Guascor engines.

The kit includes a wide variety of adapters for using with spark plugs of different metrics. RS MOTOR supplies these kits for DEUTZ, MWM, Jenbacher and Guascor engines, with Denso, Champion, Beru, Motortech … spark plugs installed. The kit can also be used in spark plugs of other brands without any problem, as long as they are without prechamber.

The MOTORTECH spark plug cleaning kit supplied by RS MOTOR, is easy to use and is completely manageable. It comes inside a briefcase that facilitates its transport and protects it at all times from bumps or dirt.

For more information, contact us at rsmotor@rsmotor.es.

If you want to get to know our “partner” MOTORTECH better, visit its website.